ВСЕ БУДЕ УКРАЇНА!

Ваш кошик порожній.

Teltonika OTD140

4G роутер

Замовити

Графічна CAPTCHA
Введіть символи з малюнку.
4G роутер
6 966,00 ₴
Артикул:
719
Маршрутизатор для зовнінього викорисання OTD140 має спеціальний і міцний пластиковий корпус зі стандартом IP55 і вбудованим монтажним кронштейном, що робить цей зовнішній 4G маршрутизатор простим у використанні та здатним витримувати зовнішні умови навколишнього середовища. Крім того, цей маршрутизатор оснащений підключенням LTE Cat 4, та сумісний з RMS, що надає можливість віддаленого керування, а також два порти PoE-in/out Ethernet.
Комплекс постачання - стандартний пакет*:
Маршрутизатор OTD140
Тримач маршрутизатора
QSG (Короткий посібник із початку роботи)
Пакувальна коробка
* Вміст стандартного пакета відрізняється для стандартних кодів замовлення.

Stuff

Зображення
Техничні характеристики
MOBILE
  • Mobile module
    4G (LTE) - LTE Cat 4 150 Mbps DL, 50 Mbps UL; 3G - 21 Mbps DL, 5.76 Mbps UL; 2G - 236.8 kbps DL, 236.8 kbps UL
  • SIM switch
    2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
  • Status
    Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD
    Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list
    Operator black/white list
  • Band management
    Band lock, Used band status display
  • APN
    Auto APN
  • Bridge
    Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough
    Router assigns its mobile WAN IP address to another device on LAN
ETHERNET
  • LAN
    2 x ETH ports (can be configured as WAN), 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE IN
  • PoE ports
    1 x PoE In
  • PoE standards
    802.3af/at
POE OUT
  • PoE ports
    1 x PoE Out
  • PoE standards
    802.3af/at
  • PoE Max Power per Port (at PSE)
    24 W Max (power supply unit dependent)
NETWORK
  • Routing
    Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Network protocols
    TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough support
    H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring
    Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall
    Port forward, traffic rules, custom rules
  • Firewall status page
    View all your Firewall statistics, rules, and rule counters
  • Ports management
    View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology
    Visual representation of your network, showing which devices are connected to which other devices
  • DHCP
    Static and dynamic IP allocation, DHCP Relay
  • QoS / Smart Queue Management (SQM)
    Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS
    Supported >25 service providers, others can be configured manually
  • Network backup
    VRRP, Wired options, each of which can be used as an automatic Failover
  • Hotspot
    Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes and option to upload and download customised hotspot themes
  • SSHFS
    Possibility to mount remote file system via SSH protocol
SECURITY
  • Authentication
    Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • Firewall
    Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention
    DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN
    Port and tag-based VLAN separation
  • Mobile quota control
    Mobile data limit, customizable period, start time, warning limit, phone number
  • WEB filter
    Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control
    Flexible access control of SSH, Web interface, CLI and Telnet
VPN
  • OpenVPN
    Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption
    DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, 
    BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec
    IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE
    GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP
    Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel
    Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN
    Method of building scalable IPsec VPNs
  • SSTP
    SSTP client instance support
  • ZeroTier
    ZeroTier VPN client support
  • WireGuard
    WireGuard VPN client and server support
  • Tinc
    Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
OPC UA
  • Supported modes
    Client, Server (planned)
  • Supported connection types
    TCP
MODBUS
  • Supported modes
    Server, Client
  • Supported connection types
    TCP
  • Custom registers
    MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
  • Supported data formats
    8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
DATA TO SERVER
  • Protocol
    HTTP(S), MQTT, Azure MQTT
  • Data to server
    Extract parameters from multiple sources and different protocols, and send them all to a single server
MODBUS MQTT GATEWAY
  • Modbus MQTT Gateway
    Allows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
  • Supported modes
    Station, Outstation
  • Supported connection
    TCP
DLMS
  • DLMS Support
    DLMS - standard protocol for utility meter data exchange
MONITORING & MANAGEMENT
  • WEB UI
    HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA
    Firmware update from server, automatic notification
  • SSH
    SSH (v1, v2)
  • SMS
    SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call
    Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer
  • TR-069
    OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT
    MQTT Broker, MQTT publisher
  • SNMP
    SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC
    Management API over HTTP/HTTPS
  • RMS
    Teltonika Remote Management System (RMS)
IOT PLATFORMS
  • Cloud of Things
    Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx
    Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity
    Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  • Azure IoT Hub
    Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
  • CPU
    Mediatek, 580 MHz, MIPS 24KEc
  • RAM
    128 MB
  • FLASH storage
    16 MB
FIRMWARE / CONFIGURATION
  • WEB UI
    Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA
    Update FW
  • RMS
    Update FW/configuration for multiple devices at once
  • Keep settings
    Update FW without losing current configuration
FIRMWARE CUSTOMISATION
  • Operating system
    RutOS (OpenWrt based Linux OS)
  • Supported languages
    Busybox shell, Lua, C, C++, and Python, Java in Package manager
  • Development tools
    SDK package with build environment provided
  • GPL customization
    You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs.
INPUT / OUTPUT
  • Events
    Email, RMS, SMS
POWER
  • Connector
    RJ45 Socket
  • Input voltage range
    42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
  • Input voltage range for PoE
    42.5–57.0 VDC, reverse polarity protection, voltage surge/transient protection
  • Power consumption
    Idle: < 2.5 W / Max: < 6 W / PoE Max < 21 W
PHYSICAL INTERFACES
  • Ethernet
    2 x RJ45 ports, 10/100 Mbps
  • Status LEDs
    3 x Mobile connection type, 3 x Mobile connection strength, 4 x ETH status LEDs
  • SIM
    2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V
  • Power
    RJ45, PoE In, 42.5 – 57.0 VDC
  • Antennas
    2 x Internal antennas
  • Reset
    Reboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
  • Casing material
    Plastic (PC+ASA)
  • Dimensions (W x H x D)
    110 x 49.30 x 235 mm
  • Weight
    855 g
  • Mounting options
    Mounting Bracket (for vertical flat surface or pole mounting)
OPERATING ENVIRONMENT
  • Operating temperature
    -40 °C to 75 °C
  • Operating humidity
    10% to 90% non-condensing
  • Ingress Protection Rating
    IP55
REGULATORY & TYPE APPROVALS
  • Regulatory
    CE, UKCA, EAC, UCRF, RCM

 

Завантаження
Додаткові файли: